AMS FAQs

To login to the Catapult AMS platform, go to the web address (URL) provided to your team.

Your Catapult AMS login page will look similar to the image below.

Enter your email address and password to access the platform. If you have forgotten your password, click the 'Forgot Password' link and an email will be sent to you with instructions on resetting your password.

Gathering accurate and relevant player information and using this information to enhance performance is one of the goals of any sporting team. Results can be used to view a player's progression over time, see where their strengths and weaknesses lie or as a tool for monitoring health and performance.

In Catapult AMS, the Data Capture section, located in the left-hand menu, can be used to collect information about players in five different areas - coaching, strength and conditioning, physiotherapy, medicine and administration. Customisedtests, spanning physical, performance or mental parameters, areconfigured and placed under one of these headings.

The subheadings form a way of grouping specific tests together, but data for each test is captured the same way regardless of which test players are completing. Under 'Options' in the table of tests, there are methods for capturing data. It can be captured individually, as a bulk capture or imported from an external file.

Quick Notes allows medical staff to capture and track treatments and preventative tools for all athletes quickly through a simple checklist.

Catapult AMS identified that a key challenge for many staff (often external) associated with teams can be understanding what treatments have and have not been performed on athletes.

With the introduction of Quick Notes, routine and medical treatments can be logged in a few simple clicks instead of having to log a treatment or medical note. This saves teams valuable time and money and allows all staff to easily understand what treatments your athletes are undertaking.

Quick Notes are located by selecting 'Physiotherapy' or 'Sports Medicine' in the left-hand menu and then the subheading 'Quick Notes'.

CONFIGURE QUICK NOTES:

Navigate toAdministration - Configuration - Quick Notes Tasks Groups

Here you have the option to edit, delete or create new tasks groups

Click +Create

Give the Quick Notes Task Group a Label

Select whether this is to be related to existing injuries/illnesses or non-relational

Click Create

This will then create a default task list to the Right of Screen

Edit, Delete and Add any new tasks as needed

Once you are happy clickUpdateandSave Changes.

This group will then be available when you navigate to Quick Notes via the Left Hand Menu

Adding Quick Notes:

Navigate to Quick Notes via the Left Hand Menu.

Start a new session.

Add any players via the drop down menu.

If you accidentally add the wrong player, swipe the players name right to remove them from the session:

Once all players are selected you can add quick notes.

These quick notes can either me a Routine Treatment, a Medical Treatment (associated with an injury/illness) or one you have configured yourself.

Routine Treatments simply allow you to tick the relevant treatments performed in the session.

If you select a Medical Treatment you will be asked what afflictions it is associated with:

Select the affliction then add any comments

When viewing recorded notes, Medical Treatments will be represented by the red cross and Routine Treatments by the blue tick (see below).

Please note that players can be added multiple times if running a morning and afternoon treatment.

Once all Quick Notes have been added select Close Sessions:

If you only wish to close one player swipe left on the players name and select close:

You can now select the Closed tab, select the player then view their quick notes.

You can also use the search bar to filter results:

Whether it be related to outcome, performance or process goals, the aim of training is to see results.

For coaches, the Performance Monitoring Dashboard provides a view of player information focused on training outcomes. It is capable of displaying the results for any test and any combination of test results, according to the coach's needs. It also has the functionality to show how the latest test result has changed in comparison with past results. As with the Overview and Availability Dashboards players can be filtered according to their group or competition, with any number of groups viewed at one time.

The Performance Monitoring Dashboard is accessed by selecting 'Dashboard' from the left-hand menu and 'Performance Monitoring' in the first dropdown menu indicated below.

Player Summary

The Player Summaryis capable of displaying test results or wellness scores for each individual player. It can be configured to display squads as per the Overview and Availability Dashboards.

Finding or Viewing Players

As per the Overview and Availability Dashboard, the default view is to View All with players grouped by Training Groups.

Use the second drop-down menu above the table to select between different squads, and the third to select between groups.

Groups can be hidden by clicking the arrow beside their group name in the 'Player Summary' table.

Please utilise the search box in the top right hand corner to search for a specific athlete:

The data that is displayed on the 'Player Summary' table can be customised according to the coach's needs. Columns can be added or removed so that different test data can be displayed.

Adding a Column

Click the Settings () cog in the upper right-hand corner of the Player Summary table. A 'Player Summary Widget Settings' pop-up will appear.

Select Add column from the upper or lower right-hand side of the pop-up. A new page will appear with a number of areas that are required to fill out.

Select whether the new column is either a Test Element or Wellness.

Select the test the element comes from, by selecting the drop-down menu under 'Test Name'. Once you have selected a test, you will be able to select the element from the drop-down menu under 'Test Element'. If applicable, you may wish to add a unit of measure by typing the box located under 'Units'.

Next, determine how your results will be displayed by selecting 'Element Settings'.

'Calculation Type' relates to what value will be displayed. By selecting the drop-down menu, you can select from the latest value, the average, sum of, maximum or minimum of the recorded results, or a count of the results recorded.

'Date Range' relates to the time frame that results are selected from. Select the drop-down menu and select from one of the available ranges. NOTE:'Latest Value' cannot be selected if a calculation has been selected as multiple results are required to run the calculation.

Indicator settings can be applied to show how your results change across time. Select the calculation type (if any) and the value range you want to use as reference. These options are identical to those available at the 'Element Settings' stage.

SelectSave Column in the lower right-hand corner of the popup to create the column. It will now appear in the Player Summary Widget Settings Screen. If at any stage you decide not to create the column, select the 'Back' icon next to 'Save Column'.

Filtering Columns

Now that you have set up the column data, the Dashboard can be filtered per column to help you further limit your search and flag any potential issues.

The Member Namecolumn can be filtered by any players name.

The data columns you have set up can be filtered by the results they yield. The Catapult AMS platform allows you to select the following filter options:

Is Equal to

Is Not Equal To

Is greater than or equal to

Is greater than

Is less than or equal to

Is Less than

The platform will allow you to filter multiple columns at once.

Changing the Player Summary Display

From the 'Player Summary Widget Settings' pop-up you are also able to change the display of the 'Player Summary' table. This includes options to show player profile images, edit or delete columns, or 'hiding' columns from view.

Access the 'Player Summary Widget Settings' popup by selecting the settings cog.

To show a player's profile image on the table, click the box located to the left of 'Show Player Profile Images'.

To edit a column, select the edit icon to the right of the column name you wish to edit. You will be taken to the editing screen of 'Player Summary Widget Settings' popup. Make your changes and select 'Save Changes'.

To delete a column, select the icon to the right of the column name you wish to delete. NOTE:You will not receive a confirmation to delete, so take care before selecting this button as it will permanently delete the column and it will have to be created again.

Columns can be made hidden on the Player Summary table by unticking the box to the left of the column name.Select the same box to make the columns visible again.

Select 'Save Changes' to the upper or lower right-hand side of the widget to save your changes. Alternatively, select 'Close' at any stage to close the widget without saving.

How Catapult AMS Calculates Weekly Averages

When calculating averages from "this week", the system will take the value from the day you are currently in and the values up to and including the Monday just gone. For example if it's Friday the 24th, the system will take information from Monday the 20th (Monday just gone) to Friday the 24th (today) inclusive.

When calculating averages for the "previous week" the system will take values from the the Sunday just gone and the Monday previous. For example if it's Friday the 24th, the system will take information from Sunday the 19th (Sunday just gone) to Monday the 13th inclusive.

TeamWidgets

Team widgets provide a visual snapshot of your chosen elements, as they do in the Availability Dashboard. The widgets that are created in the Availability Dashboard are not visible in the Performance Monitoring Dashboard and vice versa. If the same widget is required, they need to be configured in both Dashboards. Refer to the 'Team Widgets' section of the Availability Dashboard guide for information on how to configure team widgets.

As part of the on boarding process, Catapult support staff can import all your users for you so your Catapult AMS platform can start to be populated with data.

The template to send to [email protected] can be found here:

Member List

Users can either be sent an invite straight away or can be added to your platform as 'pending'. We recommend only inviting necessary staff to your platform initially. Once your platform is ready all remaining users can then be invited to join your account.

The Catapult AMS platform offers you the ability to request customisation of the individual member profile.

The individual member profile contains the following sections for each member of your platform:

Schedule

Wellness Data

Training Data

Medical History

Medical Information

Personal Information

Media

[email protected]

If you have any certain fields you would like filled out for your members please send them through to . Please include all necessary details in the body of the e-mail.

Example of custom fields are:

Training Shirt Size

Playing Shirt Size

Player Strengths

Configuration(catapultsports.com/team/team/options-list)

Catapult Mapping

GPSports API

Function:

This will allow the user to link their GPSports account to their AMS account. The option to select GPSportswill be present on the pagecatapultsports.com/integrations/wearables/account

Notes:

The user must have the AMS module on their GPSports account.

Catapult Mapping

OpenField API

Function:

This will allow the user to link their OpenField account to their AMS account. The option to select OpenField will be present on the pagecatapultsports.com/integrations/wearables/account

Notes:

The user must have the AMS module on their OpenField account.

Competitions (now known as Squads)

Create

Delete

Edit

Create - Function:

Users will have the ability to create new squads and view existing squads. A green Add A Squad button will appear in the top right hand corner of the Squads page.

Delete - Function:

Users will have the ability to delete squads and view existing squads. A red trash can icon will show in the options column of the Squads List.

Edit - Function:

Users will have the ability to edit squads and view existing squads. A pencil icon will show in the options column of the Squads List.

Drills

Create

Delete

Edit

Create - Function:

Users will have the ability to create new/view existing drills and categories. A green Add button will appear in the top right hand corner of the Drills & Categories page.

Delete - Function:

Users will have the ability delete/view existing drills and categories. A red trash can icon will show in the options column of the Drills & Categories List.

Edit - Function:

Users will have the ability edit/view existing drills and categories. A pencil icon will show in the options column of the Drills & Categories List.

Exercises

Create

Delete

Edit

Create - Function:

Users will have the ability to create new/view existing exercises. A green +create exercise button will appear in the top right hand corner of the exercises page.

Delete - Function:

Users will have the ability delete exercises. A red trash can icon will show in the options column of the exercise List.

Notes:

Only exercises that are not in programs can be deleted. Once they are in a program they can only be edited.

Edit - Function:

Users will have the ability edit/view existing drills and categories. A pencil icon will show in the options column of the exercise List.

Games/Fixtures

Create

Delete

Edit

Create - Function:

Users will have the ability to create new/view seasons/phases/fixtures. A green Add button will appear in the top right hand corner of the seasons, phases and fixtures page.

Delete - Function:

Users will have the ability delete seasons/phases/fixtures. A red trash can icon will show in the actions column of the fixtures List.

Edit - Function:

Users will have the ability edit/view existing seasons, phases and fixtures. A pencil icon will show in the actions column of the fixtures List.

Groups

Create

Delete

Edit

Create - Function:

Users will have the ability to create new/view groups. A green Create Group button will appear in the top right hand corner of the groups page.

Delete - Function:

Users will have the ability delete groups. A trash can icon will show in the actions column of the groups list.

Edit - Function:

Users will have the ability edit groups. A pencil icon will show in the options column of the groups list.

Member Data Restrictions

Assigned Groups Only

Function:

The user will only have permission to the groups they are assigned to via the Groups page. When a group is created you will be required to input staff who are assigned to the group. This feature is a great way to have many users on the same role and access but restrict their usage and the data they have access to.

Member Data Restrictions

Moderator

Function:

This will mean the user has access to all players and groups regardless of which groups they are assigned to.

Mobile Reporting

Function:

This will allow users to select which test elements are available for reporting.

Opponents

Create

Delete

Edit

Create - Function:

Users will have the ability to create new/view opponents. A green Add an opponent button will appear in the top right hand corner of the opponents page.

Delete - Function:

Users will have the ability delete opponents. A trash can icon will show in the actions column of the groups list.

Edit - Function:

Users will have the ability edit opponents. A pencil icon will show in the options column of the groups list.

Permissions

Create

Delete

Edit

Function:

This function allows the user to edit the role of an individual via the Members List page. If they have this permission the role of the member will show as a hyperlink and the user will be able to edit the role of an individual via this page.

Notes:

You must have at least edit selected for this function to work. Delete and Create are not applicable.

Positions

Create

Delete

Edit

Create - Function:

Users will have the ability to create create positions. A green Add Position button will appear in the top right hand corner of the positions page.

Delete - Function:

Users will have the ability delete positions. A trash can icon will show in the options column of the position list.

Edit - Function:

Users will have the ability edit opponents. The position will appear as a hyperlink.

Notes:

You cannot allow view and delete access only. To allow a user to delete a position they must also have edit access.

If a user has create and edit access only they will see the trash can icon on the page but if they attempt to delete role they will not have the permission to.

Quick Notes

Tasks

Create

Delete

Edit

Create - Function:

Users will have the ability to create create Quick Notes Tasks Groups. A green +Create button will appear in the top right hand corner of the Quick Notes Tasks Groups page.

Delete - Function:

Users will have the ability Quick Notes Tasks Groups. A trash can icon will show in the Action column of the Quick Notes Tasks Groups list.

Edit - Function:

Users will have the ability edit Quick Notes Tasks Groups. A pencil icon will appear in the Action column of the Quick Notes Tasks Groups list.

Roles

Create

Delete

Edit

Create - Function:

Users will have the ability to create create positions. A green Create New Roles button will appear in the top right hand corner of the roles and permissions page.

Delete - Function:

Users will have the ability delete roles. A trash can icon will show in the options column of the roles list.

Edit - Function:

Users will have the ability edit roles and permissions. A pencil icon will appear in the options column of the roles list.

Notes:

Before a user can delete a role, if any members on the platform have that specific role they must reassign their role. Only created roles with no members assigned to it can be deleted.

Settings

Edit

Function:

This will allow the user to edit the team name, description, timezone, date format, locale, mobile passcode and Two-Factor Authentication.

Training Sessions

Edit

Function:

This will allow the user to select what type of training sessions they can configure via (catapultsports.com/team/team/training-sessions). If they have test with GPS data enabled they can also select the parameters they wish to report planned v actual on via this page.

Venues

Create

Delete

Edit

Create - Function:

Users will have the ability to create create venues. A green Create New Venue button will appear in the top right hand corner of the venues page.

Delete - Function:

Users will have the ability delete venues. A trash can icon will show in the options column of the venues list.

Edit - Function:

Users will have the ability edit venues. A pencil icon will appear in the options column of the venues list.

Wellness

Function:

This will allow the user to configure thresholds, set scheduled reminders and configure what wellness elements the team will activate.

Overview:

The Messaging tab is the third tab of the Athlete App.

Messaging Functionality:

Create a New Message:

Navigate to the Messaging tab

Click the + button in the bottom right hand corner to create a new message

Select whether you want to send a direct message or a group message. If selecting a new group and you are part of multiple teams you will need to specify which team you are creating a group message for.

Invite the relevant users/groups

Enter a name for the Message

Click Create. This will create the conversation

Input the Message in the space below

Delete Messages:

Swipe on the Message you wish to delete to the LEFT until the trash can appears

Click Yes to confirm the deletion

Overview:

The Individual Profile can be access from the Home Screen of the Athlete App.

Click on your profile picture in the top right hand corner to navigate to your App profile.

Here you will have the option to update:

Profile Picture

Phone

E-mail

Date of Birth

Gender

Navigating the Profile:

Profile and Settings Functionality:

Edit Profile Details:

Click the pencil icon in the top right hand corner to edit any profile details.

Edit Your Context:

Via this screen you will also be able to choose your context for viewing the app. This will give you the option of 'Just Me' plus any other team(s) you are part of. If you are part of multiple teams you will have the option to Select 'All Teams'.

Once you have selected a context, this will be visible via the bottom menu. Your team logo or individual profile image will display allowing you to always visualise what context you are in.

If you wish to change your context at any time, you can click on this icon and update

Edit Settings and Logout:

Within the Profile page you can also click the setting cog in the top right hand corner.

This will take you to the settings screen as shown below. Here you are able to configure account settings, calendar settings and app settings along with having the ability to Log Out.

Overview:

The Data Capture tab is the fourth tab of the Athlete App.

Navigating Data Capture:

Data Capture and Wellness Functionality:

Submitting Data:

Navigate to the Data Capture tab

If the Data Capture form is linked to a Calendar Event it will display on the Today and Week tab

You are able to click into these tabs then click the relevant form and complete it.

If you are wishing to submit Wellness or other data that is not linked to a Calendar Event please click on the All Forms tab then select the form and submit the data

Overview:

Once logged onto the app, you will land on the Home Screen. The Home Screen can be navigated to at any time by selecting the Home Icon via the bottom menu bar.

Types of Event Templates

The home screen will provide an overview of the following information:

Date

Link to Profile

The next three events scheduled

Weather

Forms Awaiting Completion

Daily Forms Completion Data

Navigating the Home Screen

Calendar:

Info: The current day will display at the top of screen as shown below. The next three scheduled events along with the daily weather in your current location will populate in the widget below.

Functionality: Click on the Next 3 Events Header to expand or collapse the widget to show/hide the next three events.Click any of the listed three events to take you to that event in the Calendar tab of the app.Click 'View All' to navigate to the Calendar tab of the app to view all events for the current day.

Profile:

Info:Your profile picture will display in the top right hand corner of the Home Screen.

Functionality:Click your profile image to be taken to the Profile section of the Athlete App.

Forms Awaiting Completion:

Info:Any Calendar Events with the Event Template - Test configured, prompting athletes to complete a data capture form via that specific Calendar Event, will filter through to this section of the Athlete App. Please seefor further information.This area of the mobile app is extremely useful so athletes can track their progress and ensure they are completing all tasks as required by their managers.

Functionality:Any Calendar Events that prompt users to complete a specific type of Form numerous times per day, will group and display the time of scheduled completion.For example, if you are on a pre-season camp you may wish athletes to complete Session RPE after each specific session of the day. The forms awaiting completion will display as shown below with the time of event and progress bar.Clicking into this progress bar will take you all the forms for the day and allow to complete them.Events passed are displayed by a circle icon (the 8:30am session below) and any sessions yet to take place (in the future) and displayed by the greyed out square (the 2:00pm and 6:30pm session below). Once the form is complete your progress chart will update and a new Forms Completed section will appear below (as shown below):

Daily Forms Completion:

Info:A progress bar for each Form and overall completion chart of all Forms will display on the Home Screen.

When logging into the Athlete App you will need to ensure you select the correct region. If you accidentally select the incorrect region you will receive an error message when logging in.

If you are unsure as to what region you are in please contact [email protected]

Input your region then login with the same credentials as you set when accepting the team invite to the web platform.

The login details for the Athlete App will be exactly the same credentials as the web platform.

When logging in you will be asked to first to select your region. It is important you get the correct region or else you will not be able to log in.

Please refer to Selecting the Correct Region for further information.

A passcode may be required to be set on the Athlete App depending on how your account is set up.

Via Administration - Configuration - Team Settings on the web platform, users with permissions can determine whether a passcode is disabled, optional or required when logging into the app.

After logging in, set a 6 digit passcode.

This passcode is an extra layer of security and will be required each time the app is opened fresh. If the app is open in the background of your phone, the passcode will not be required.

Viewing Quick Notes:

Use the calendar tool to navigate to the date you require.

Dates with quick notes will be visible via the dot under the date:

Select the date then review the players notes via the Closed Tab.

Like all areas of the platform, Reporting V2 has associated permissions related to it.

These permissions relate to what type of reports users can see (medical, wellness, coaching etc) and what level of access they have to these type of reports (create, delete, read and update).

To configure this level of access for your team roles please navigate to Administration - Configuration - Roles and Permissions:

Once you are on this page, please edit the role you wish to configure access for.

Permission for Report V2 can be found under the Reporting branch of permissions:

Click the drop down arrow to view further permissions below this top level of access:

Access:

In this section you determine what level of access users have to Reporting V2.

The options are:

Create - users can create new reports based upon their Reportables access (see below). Please note you must have read access as well to create new tests otherwise access will be denied.

Delete - users can delete reports based upon their Reportables access.Please note you must have read access as well to create new tests otherwise access will be denied.

Read - allows user to view reports based on their Reportables access. This is a useful feature to allow users to view reports without giving any extra access.

Update - allows users to edit existing reports.Please note you must have read access as well to create new tests otherwise access will be denied.

Snapshots:

In this section you must determinewhat level of access the user has to report snapshots:

The options are:

Create - users can save snapshots. Please note that you must have read access enabled to ensure they can view these saved snapshots.

Delete -users can delete saved snapshots via the options columns of the snapshot list table.Please note that you must have read access enabled to ensure they can view these saved snapshots to delete them.

Read -users can view saved snapshots but unless they have additional access above they cannot create or delete them.

Reportables:

This section relates to what reports the user can see.

When you navigate to the reports list, each report will be tagged based upon the data that is present with in the report:

In this section you must configure what categories of data users can see.

This is based upon the following areas:

Injury

Illness

Responses - data capture broken down further into all test areas.

Treatment Notes

Wellness

Please note that users must have all associated levels of reportables access to view the report with multiple tags.

You will notice from the image below that one report contains wellness data, injury data and illness data.

This means that the users role must have permissions to ALL of these reportables (wellness, injury and illness) to be able to view the report.

Catapult AMS is Catapult Sports performance management system includes executive, coaching, medical and third party support functions, along with extensive reporting, alerts and athlete welfare, training and performance monitoring capabilities. Custom-built to boost performance, reduce susceptibility to injury and recovery time, and in general improve the overall health and personal well-being of the athlete. The products predictive engine assists sporting organisations to manage athletes more efficiently by aggregating new and pre-recorded medical, performance and behavioural data and deliver trends and insights of an athlete or individual and collate on one platform. Catapult AMS's mobile product captures any data metric before, during or after training sessions. For athletes, this is made easy by the capacity to integrate over 200 wearable devices.

Adding a Logo

Click the + button in one of the squares of the report you are configuring.

Select Add Logo from the list of options.

[email protected]

This will automatically add your logo to the report.

**If you do not see this option or would like to change your logo please send through the logo to and we will update it for you.

Once data has been collected, it is important to go back over it and see what the implications are for the team. Results can be analysed individually or within a team context, but always with the aim of identifying how performance or health can be improved.

Catapult AMS offers a number of options to view data. These options are designed to suit your needs so that you can make the best use of your data.

Viewing Test Results

Select 'Data Capture' from the left-hand menu, and the department the test is located in (Strength and Conditioning, Prevent and Rehab, Sports Medicine or Administration).

Locate the test you wish to view results for using the filter above the list of tests.

Click the blue 'View' icon in the right-hand 'Options' column.

You will be taken to a new screen showing the data that has been recorded for that test. Some of the data may be shaded depending on the alert settings for that test, with a legend located below the table to indicate what the shading means. Below the list of results, the maximum, minimum and average scores of the results can be seen.

Results are automatically categorised by player and filtered to only include test results from the past month. These filters, as well as other viewing options, can be manipulated using the icons located within, or above, the table of results.

Filtering by Date or Group

The date and group filter is located in a pale blue box directly below the table title, to the top left-hand side of the screen.

To filter by date, select the date and a drop down menu will appear. Select from one of the options or set a custom date range. Update by selecting 'Filter'.

To filter by group, select the drop down arrow next to 'Groups Selected'. Search for the group you want to view, or select multiple groups from the list, and select 'Filter' to update the table.

Table of Results Viewing Options

Sort results by element by selecting the element name at the top of each column.

Hide columns by selecting theicon beside an element name. Deselect the columns you wish to be hidden. Columns can be made visible by selecting them again.

Change the order of columns by clicking and dragging the column title to a new location.

Specific results can be found by searching through the filters located below each element name. Theicon can be selected to view a drop-down menu of other conditions that can be applied to the search filter.

The items per page can be changed by selecting the drop-down arrow to the bottom left-hand side of the table. Select a number from the drop-down menu and the page will automatically refresh. Navigate between pages of results using the arrows to the left of this menu.

Other Options

Options to export and record data have been included on this page for the user's ease of use.

Export results to a Microsoft Excel document by selecting the dark blue 'Export to Excel' button located above the table. Data is exported according to the filter settings that have been selected.

Individual, bulk capture and import as CSV icons can be located to the top right-hand side of the table, as per the icons on the 'Data Capture' page. For more information on what each of these functions does, refer to their respective pages.

Adding a Chart

Click the + button in one of the squares of the report you are configuring.

Select Add Chart from the list of options.

This will then open up the configuration window (see below).

Title

The first field asks you to enter in the Title.

This can either be done via this first field or by clicking into the 'Click to enter Plot Title' via the chart preview:

Chart Types

You are then able to select which sort of chart you wish to display your data. The options are as follows:

Axis Data

The next part of chart configuration asks you to determine the X and Y axis. Depending what type to chart you have selected above you will also have the option to add a secondary Y Axis (Line, Scatter, Area, Column, Stacked or Combo) or secondary X Axis (Bar). If you select a Pie Chart you will not have the option to add any secondary axis.

For the source of both the X Axis and Y Axis you will have any field in the following areas:

General (e.g user name, week, month etc)

Seasons, Phases, Fixtures (as created in Administration - Configuration - Seasons Phases Fixtures)

Wellness (all wellness data)

Medical (Injury, Illness and Treatment Notes)

Data Capture (any test set up on you platform)

Click the drop down source type list and you can either scroll until you find the field you are after or you can type in the search box (see below). Once you have have source type selected you will need to then select the specific source.

Once you have your source selected you are able to choose the calculation type.

For most fields you will have the choice between none and count. For number fields you will have the option of the above along with minimum, maximum, sum and average.

Here is how each of those calculation options will show:

None - This will simply display the value(s).

Count - Number of occurrences.

Minimum - Minimum number.

Maximum - Maximum number.

Average - Total/Count.

Sum - Total

If you select minimum, maximum, average or sum have the option to select a Moving Range.

This moving range allows you to compare overall values vs a moving range for your pre-defined time frame. If you plot two Y-Axis of the same parameter make one with a moving range vs one without to compare overall results with your range.

Extended Chart Options

Click Extended Chart Options to display options on joining line charts and legend orientation.

Please note you can also manually move the legend by dragging it via the right hand preview screen to the desired position.

Filters

The next part of the configuration allows you to select who to data applies for (team, group and/or individual), the date range to select the data from (fixed or dynamic), whether you want to group the data, filter it and/or order it.

Select Users and Group:

In this section, by default, the users you selected when initially setting up the report will be chosen.

This is pre-populated for your convenience if creating a report for the same user(s), however you still have the ability to configure which user(s) you want to display data for in each chart.

Clicking into the field will show you the drop down. This will give you a list of All Team (Users, Average and Sum), Each Group (Users, Average and Sum) and each member.

If you select all team, a group or any member the data will display for each member you select.

If you select all team (average) or group (average), the data will display only the average of the group or team.

If you select team (sum) or group (sum), the data will display the total for the group or team.

Select Date Range:

Much like Users and Groups, in this section, by default, the date range you selected when initially setting up the report will be chosen.

This is pre-populated for your convenience to save you time. However, it can be configured per chart.

Filter By:

The chart may be filtered by any of the fields you are able to report on. For example you may wish to view the average sessions missed along with the total sessions missed for the team.

You are then able to filter the data to show you the average games missed and total games missed when the type of injury was a fracture.

Likewise, you can filter the data to only display the data from one member so, using the example above, the average and total games missed will apply to that one member.

The following options are available when filtering data:

=

field is equal to X

!=

field is not equal to X

In

multiple values can be selected. For example user name In Player X, Player Y and Player Z

>

field is greater than X

<

field is less than X

>=

field is greater than or equal to X

<=

field is less than or equal to X

Group By:

Like in normal reporting, you are able to group your results by another field(s).

For example you may wish to view all causes of injury then group then by the side or part of the body they affected.

Order By:

The last part of the chart configuration allows you to order the data alphabetically by any field in injury, illness, treatment notes and general.

Please note that ordering grouped data will overwrite any grouping you may have.

A default team address can now be added to your Catapult AMS Platform.

Navigate to Administration - Configuration - Team Settings:

You can now set a default address for your team.

Prior to inputting the address a map of the whole world will show:

Start to input the address and known addresses will pre-populate in the list below:

Select the address and it will then show in the map below:

Click Apply Changes to Save the default address.

Whenever a new calendar event is created the map you have set as the default above will show (see below):

Venues can be created and linked to various other sections of Catapult AMS, such as the calendar or when creating a training session.

Navigate to Administration - Configuration - Venues

This will show you a list of current venues on your platform and also allow you to create new venues.

Click Create New Venue.

Input the Venue Name.

Select whether this is a competition, training or other type of venue.

Add a description if necessary.

Input the address to add the map to the venue.

Please note that you do not have to add an address to a venue if it is not applicable. For example you may set a meeting in the Coaches Office or in a certain Meeting Room.

EDIT EXISTING VENUES:

Navigate to Administration - Configuration - Venues

Click the pencil icon to edit the name, type, venue description and address:

Catapult AMS now allows user to configure a colour palate for Reporting V2.

Navigate to Administration - Configuration - Team Settings

Scroll down to the Reporting Chart Colours section

Use the arrows to move the colours up or down the order or the dash to remove them.

Click into the colour to bring up the colour config window.

Click the code box below to copy the hexadecimal codes of the colours above.

Click Reset to revert any changes you have made.

Click Apply Changes to save.

Navigate to Administration - Configuration - Wellness

Scroll down the page until you see the wellness parameters. If this is the first time you are setting up Wellness it is likely that all parameters are enabled.

You will have two options here:

Whether or not the parameter is enabled for Wellness capture

Whether or not the parameter should be included in the Overall Wellness Calculation

Simply click on the button to enable or disable the specific parameter.

Navigate to Administration - Configuration - Wellness

Scroll down the page until you see the wellness parameters. If this is the first time you are setting up Wellness it is likely that all parameters are enabled.

You will have two options here:

Whether or not the parameter is enabled for Wellness capture

Whether or not the parameter should be included in the Overall Wellness Calculation

Simply click on the button to enable or disable the specific parameter.

Catapult AMS redesigns reporting to centralise medical, training and performance reports

Catapult AMS has released more advanced and user-friendly reporting across the platform. This replaces the existing reporting module by building on the popular functionality introduced in the medical reporting release.

All reporting is now centralised, with medical, training and performance reports all conveniently located under one menu. Everything is still role and permission-based, meaning that if youdon'thave access to medical records, for example, youwon'tsee those reports.

New Calculation Options

This latest release introduces new calculation options that are available when creating a chart in reporting, including:

Count

Max

Min

Average

Sum

Moving Range

Moving Range refers to rolling averages and sums. In the past, you were limited to five and 28-day rolling sums and averages, but the number of days can now be fully customised and applied to average, sum, min or max calculations.

New Source Type Options

You can now expand upon the reporting options included in medical reporting, with source type options now including the following:

General

Seasons, Phases and Fixtures

Wellness

Medical (Injury, Illness, Treatment Notes)

Data Capture

Source Type Elements

This latest Catapult AMS release allows you to expand on the reporting options included in medical reporting. While new source type options are available, you can now look at all the elements included in each source type.

Source type elements include the following:

General (All general options previously included in medical reporting)

Seasons, Phases and Fixtures

Sessions

Fixtures

Fixture (Home/away)

Fixtures (Opponent)

Training Week

Training Week (Pre-season)

Training Week (Trials)

Training Week (In-season)

Wellness (All wellness options enabled for team)

Medical

Injury (All previously enabled elements associated with injuries)

Illness (All previously enabled elements associated with illness)

Treatment Notes (All previously enabled elements associated with treatment nots)

Data Capture

All tests enabled for a team and all elements associated with those tests

Creating a Pivot Table

You can now create a pivot table chart in Catapult AMS, allowing you to summarise data while reporting and exploring trends based on that information.

To access the new pivot table feature, simply click on the + symbol in the report and locate the Add a pivot table option. A pop-up box will then display, allowing you to enter all required information.

If you would like to upgrade your account to the new reporting module, contact our product support team here.

Treatment Notes

Create Treatment Notes

Function:

This allows users to create new treatment notes. A green Add New Treatment Note button will appear in the top right hand corner of the Treatment Notes page.

Delete Draft Treatment Notes

Function:

This allows users to delete draft treatment notes. Please note that once a treatment note is finalized they cannot be edited or deleted. A trash can icon will appear in the actions column of the Treatment Notes list.

Edit Draft Treatment Notes

Function:

This allows users to edit draft treatment notes. Please note that once a treatment note is finalized they cannot be edited or deleted. A pencil icon will appear in the actions column of the Treatment Notes list.

Publish Treatment Notes

Function:

This will allow users to save draft treatment notes and finalise treatment notes.

Notes:

This user must have edit access to access the treatment notes from the Treatment Notes page, otherwise they will be able to publish notes via the Injury or Illness form should they also have the create treatment notes permission.

View Treatment Notes

Function:

This allows users to view Treatment Notes. An eye icon will show in the actions column of the Treatment Notes list.

Notes:

This is a way to allows users to view treatment notes without having any further access. If this permission is not ticked but the user still has some form of access above, they will be able to view treatment notes.

Quick Notes

Quick Notes

Create Quick Notes

Function:

This allows users to create Quick Notes. Quick Notes are available under the Physiotherapy (Prevention and Rehabilitation) and Sports Medicine left hand menu items.

When you're ready to begin sending invitations to your athletes so that they can begin to enter information for themselves into the database, you can go into the Pending section of the "Members/Users" page under Administration and send out their invites by clicking the Paper Airplane button:

Once the invitations have been sent, here are the steps to send to your athletes:

Open your Registration email from AMS By Catapult Mail Services so that you can set your password.

Download Catapult AMS in the App Store or Google Play.

Open the app and select North America as your region.

Enter your email and password.

In the Dashboard tab, select Record Wellness in the top left corner to enter your wellness for the day. When youre finished, select Update in the top right corner. Make sure to change the time you went to bed and the time you woke up with the proper dates in the two black boxes at the top of the screen.

Overview:

To ensure you can capture all relevant data for your athletes please send through a request to get these tests set up. The details of this request are explained below.

Once all the information is provided to a member of the Catapult AMS staff, we will be able to create the test for you. We will then reach out and get you to check the test to see if any amendments are needed.

How to request a test:

To request a test to be set up on your Catapult AMS platform please send an e-mail to [email protected] with the following information:

Name of Test

Description

Part of Platform it should fall under:

Strength and Conditioning

Coaching

Medical

Prevention and Rehabilitation

Administration

Sections and Elements of test - Please see below for an explanation

Detail of each element - required or not required, type of element (see below for an explanation)

What is a section of a test?

A section of a test contains a group of fields/questions known as elements.

What are elements of a test?

The elements of a test are all the fields/questions you will complete when collecting data. There are a number of different element types we can configure for you and we can make these fields either required or not required. You will not be able to submit data unless required fields are completed.

Types of elements:

Date - This will be present in all tests and will pre-populate to the current date to help you identify when data was collected. We can allow past and future dates to be submitted when collecting data.

Number - Standard number field. A defined number of decimal places and range for min and max values can be configured.

Slider - Ability to select one entry from a sliding scale (a default position can be selected)

Select - Ability to select one entry from a list.

Range - Ability to select between a range of grouped values.

Time -HH:MM:SS orHH:MM AM/PM

Timer -HH:MM:SS

String - Used for text fields.

Calculation - This field will not show when submitting data but once you view results it will populate. The calculation can only be based upon other elements within the test.

Example of Data Capture/Test Request:

If you have a CSV file of any historical data simply send this through and we can create the test based on that information. For any new test please see below as an example of how to request this.

Name: Player Body Weight and Hydration Status

Description:A measure of a person's weight expressed in kilograms (kg) and USG

Category: Strength and Conditioning

Section

Element/Field

Type of Element

Options/Range

Body Weight

Date

Date

Required

Body Weight

Body Weight

Number

2 decimal places

Hydration Status

USG

Number

3 decimal places. Range (Value between 1.000 and 1.0600 only accepted.)

Hydration Status

Comments on Hydration

String

-

Overview:

To ensure you can capture all relevant data for your athletes please send through a request to get these tests set up. The details of this request are explained below.

Once all the information is provided to a member of the Catapult AMS staff, we will be able to create the test for you. We will then reach out and get you to check the test to see if any amendments are needed.

How to request a test:

To request a test to be set up on your Catapult AMS platform please send an e-mail to [email protected] with the following information:

Name of Test

Description

Part of Platform it should fall under:

Strength and Conditioning

Coaching

Medical

Prevention and Rehabilitation

Administration

Sections and Elements of test - Please see below for an explanation

Detail of each element - required or not required, type of element (see below for an explanation)

What is a section of a test?

A section of a test contains a group of fields/questions known as elements.

What are elements of a test?

The elements of a test are all the fields/questions you will complete when collecting data. There are a number of different element types we can configure for you and we can make these fields either required or not required. You will not be able to submit data unless required fields are completed.

Types of elements:

Date- This will be present in all tests and will pre-populate to the current date to help you identify when data was collected. We can allow past and future dates to be submitted when collecting data.

Number- Standard number field. A defined number of decimal places and range for min and max values can be configured.

Slider - Ability to select one entry from a sliding scale(a default position can be selected)

Select- Ability to select one entry from a list.

Range- Ability to select between a range of grouped values.

Time-HH:MM:SS orHH:MM AM/PM

Timer-HH:MM:SS

String- Used for text fields.

Calculation- This field will not show when submitting data but once you view results it will populate. The calculation can only be based upon other elements within the test.

Example of Data Capture/Test Request:

If you have a CSV file of any historical data simply send this through and we can create the test based on that information. For any new test please see below as an example of how to request this.

Name:Player Body Weight and Hydration Status

Description:A measure of a person's weight expressed in kilograms (kg) and USG

Category:Strength and Conditioning

Section

Element/Field

Type of Element

Options/Range

Body Weight

Date

Date

Required

Body Weight

Body Weight

Number

2 decimal places

Hydration Status

USG

Number

3 decimal places. Range (Value between 1.000 and 1.0600 only accepted.)

Hydration Status

Comments on Hydration

String

-

Navigate to Administration - Configuration - Wellness

In step one you enabled all the wellness parameters you wish your members to complete.

Now that you have completed this step we can set up alerts based upon the wellness parameter you have enabled.

General Wellness High Risk Threshold:

This alert is based upon all the parameters you have enabled under the General Wellness Category.

The parameters in this category are:

Time Slept (hours)

Sleep Quality

Readiness to Train

Recovery Rating

General Soreness

Fatigue

Stress Levels

Mood

Motivation

Nutrition Quality

Appetite

Yesterdays Productivity

Apart from time slept which is in hours, all parameters are given a score out of 5 (10 possible data points moving in 0.5 increments).

The alert we are setting up will relate to a poor score based upon these parameters.

Therefore when setting up this alert we must look at the following:

Number of parameters enabled

An at risk score based upon the max score

For example, if we have 5 general wellness parameters enabled plus time slept, the max score a member could get for this General wellness score would be:

5 (no. of enabled parameters) x 5 (max parameter score) + time slept

= 25 + Time Slept

If we add an average nights sleep of 7.1 hours to the maximum score the highest possible general wellness results would be 32.1 (25 + 7.1).

Now that we know the maximum we need to determine what % of max would determine an 'at risk' alert. For example if you determine an 'at risk' score to be 50% and below you would input 16.05 into the box

General Wellness Performance Alert Threshold:

Setting up this alert follows the same principles as above except we want to set an alert for when a player is submitting exceptional results.

Therefore we would set up the alert to be close to the maximum score of 32.1

Muscle and Joint Soreness High Risk Threshold:

This alert is based upon all the parameters you have enabled under the Muscle Soreness and Tightness and Joint Stiffness and Soreness Wellness Categories.

The parameters in this category are:

Muscle Soreness and Tightness

Neck/Shoulder Tightness

Lower Back Tightness

Hamstring Tightness

Glute Tightness

Groin Tightness

Quad Tightness

Calf Tightness

Joint Stiffness and Soreness

Knee Stiffness

Ankle Stiffness

Like above, determine how many parameters you have enabled and then multiple this by 5 (max score for each parameter) to determine the max score for this wellness category.

Muscle and Joint Soreness Performance Alert Threshold:

Setting up this alert follows the same principles as above except we want to set an alert for when a player is submitting exceptional results.

Therefore we would set up the alert to be close to the maximum score.

High Risk Alert Text:

In this field you must input the text you wish to see whenever the high risk alerts you have configured above are triggered.

Performance Alert Text:

In this field you must input the text you wish to see whenever the performance alerts you have configured above are triggered.

Alert Recipients:

Click into these fields to determine which staff you wish to receive an e-mail whenever either a high risk alert or performance alert is triggered.

Click Save Changes to save all the edits you have completed.

Things to Remember:

If you ever disable or enable parameters please adjust your threshold accordingly to avoid missing alerts or receiving too many alerts.

Navigate to Administration - Configuration - Wellness

Scroll to the bottom of the page until you reach the Wellness Reminder section.

If you wish to send a push notification to remind members to complete their wellness at specified times please click the button next to Automatic Schedule.

As soon as you toggle to enable this feature you should see a number of new fields.

These fields relate to the days you wish to send the reminder, the time you wish to send the reminder and if after the initial reminder is sent, whether you wish to send a secondary reminder if it is not completed.

Submission Frequency - Tick all the days you wish to send a reminder on

Reminder Time - Input the time (24 hour format) you wish to send the wellness reminder

Remind after every - If wellness is still not submitted after the reminder time notification you can select whether you want to remind member every 5 mins, 15 mins or hour.

The My Data tab of the Individual Context contains a link to any Strength and Conditioning Programs assigned to the user, links to any data capture forms that allow individuals to collect data and a performance analysis page where they can view any results for tests that have data submitted for them.

Program:

Select the Program tab

Use the date bar at the top right of the screen to select the desire time that you wish to review.

Dates will programs assigned will be visible by the coloring

Once the date is selected you will have the option to print the program or record it

Select the Recorded Tab

A list of recorded workouts will show on this tab

You have the option to print them or view the progress

Data Collection:

Any tests on the team account that are set up to allow individuals to capture data will show here. Individuals can record their result and view them via this page.

Performance Analysis:

Any results recorded against the user will populate here under the relevant data capture test.

The user can click into the data capture test to view their results.

As a staff member, you have two views or "contexts" when using Catapult AMS: Individual and Team (also referred to as Franchise or Organisation).

You can switch between these by using the dropdown in the top-left corner immediately under your name.

Individual

Team

Changing Your Default View

The platform may be set to default to your Individual or Team context when you login. To change this:

Go to your member profile

Click on the 'Profile Info' tab

Go to the 'Default Settings' section

Select your team name in the 'Default Login Context' drop-down.

The top menu on the Catapult AMS will always display and contains some good shortcuts to assist your use of the Catapult AMS Platform.

Via the Top Menu you can quickly search for any user on your platform and be taken to their user profile.

Support:

If you are ever not sure of how to use the platform click here. This will take you to this platform and allow you to select different areas of the platform and their knowledge articles.

CSV Import (Upload CSV File):

This will take you to the Import Data wizard where you can import test data, new users and wellness data.

Notifications:

Any new notifications on the platform will appear here. New notifications will be visible via a red number appearing next to the notification icon.

Clicking the notification icon will show you all your notifications. To mark the notifications as read click the following icon:

Messages:

The messaging link allows you to read and reply to existing messages along with creating new ones.

New messages will be shown by the red number notification as shown below.

Comments:

Comments are different to messages and can be left regarding certain areas of the platform.

New comments will be shown by the notification and once selected will show the comments bar to the right of screen.

Language Selector:

To change the language of your Catapult AMS platform click the world icon and select the language as required.

Individual Profile / Logout:

To view your individual profile or logout of your platform click your profile picture in the top right hand corner. This will then allow you to view you profile or logout.

Left Hand Menu

The Left Hand Menu of the Catapult AMS platform contains all menu items and is grouped by headings to help you easily find the part of the platform you are after.

The Left Hand Menu view will differ for each individual and will be based upon the specific role (and that role's permissions) that user has.

Clicking on the menu item will either take you to that part of the platform (e.g Dashboard and Calendar) or collapse the menu item to show you the sub-items (e.g Coaching, Reporting and Strength and Conditioning).

Collapse the Left Hand Menu:

The Left Hand Menu can be collapsed by pressing the Catapult Logo at the top of the page or the left hand arrow at the bottom of the menu (see below).

This is a useful feature to help with screen space when viewing reports.

The collapsed view will look like this:

Top Menu

The top menu on the Catapult AMS will always display and contains some good shortcuts to assist your use of the Catapult Platform.

Via the Top Menu you can quickly search for any user on your platform and be taken to their user profile.

Support:

If you are ever not sure of how to use the platform click here. This will take you to this platform and allow you to select different areas of the platform and their knowledge articles.

CSV Import (Upload CSV File):

This will take you to the Import Data wizard where you can import test data, new users and wellness data.

Notifications:

Any new notifications on the platform will appear here. New notifications will be visible via a red number appearing next to the notification icon.

Clicking the notification icon will show you all you notifications. To mark the notifications as read click the following icon:

Messages:

The messaging link allows you to read and reply to existing messages along with creating new ones.

New messages will be shown by the red number notification as shown below.

Comments:

Comments are different to messages and can be left regarding certain areas of the platform.

New comments will be shown by the notification and once selected will show the comments bar to the right of screen.

Language Selector:

To change the language of your Catapult AMS platform click the world icon and select the language as required.

Individual Profile / Logout:

To view your individual profile or logout of your platform click your profile picture in the top right hand corner. This will then allow you to view you profile or logout.

The Medical History tab of the Individual Profile provides an overview of all historical general medical notes, injuries, illnesses and their associated treatment notes. There is also a link to create an injury or illness for the user.

General Medical and Rehab Notes:

This section is for additional medical notes on the player that are not captured via the Medical Notes or Treatment Notes section of the platform.

To set up the different note categories, navigate to Administration - Configuration - Medical Note Categories:

Here you can add new categories that will be used when adding a new note:

As shown below, the new category is now available via the General Medical and Rehab Notes section:

All notes added will be able to be viewed here and can be filtered, sorted and searched for using the available tools:

Injuries and Illnesses:

All injuries, illnesses, treatment notes and associated medical notes will populate in this section.

The injuries and illnesses will be able to be identified but the associated icon (bandage for injury and sad face for illness).

By clicking the down arrow to the right of each injury, illness or treatment note, you will get a link to display full details, a list of all associated medical notes and hyperlink to associated treatment notes.

The API/Integration of the Openfield and GPSports Cloud data into the Catapult AMS platform, is the first of many steps that Catapult are taking to improve the efficiency of the workflow surrounding these products in sporting organisations around the globe.

The API works through the user conducting aONE-TIME PLAYER MAPPINGto align the products. This allows for the ongoing synchronisation ofOPENFIELDand/orGPSPORTS CLOUDdata to the CATAPULT AMSteam whenever the sync is run onCONSOLE.

It is important that the user who sets up this integration is not archived otherwise the data will stop syncing.

If you require the AMS module on your OpenField/AMS account please reach out to [email protected]

Navigate to Administration - Configuration - OpenField/GPSports Cloud

Mapping AMS Athletes to OpenField/GPsports Athletes

Select the account type and region then enter your credentials for your OpenField/GPSports Cloud account, then click Next.

Click here to view how to map players:

Now that you have logged into your wearables account you will be asked to select which team(s) you wish to map. All players are available to be mapped.

Click Next once the team is chosen.

The members in the OpenField/GPSports Cloud need to be mapped up to the AMS members. To do this, choose the name from the dropdown list. Once all members are mapped, click Next.

Once complete you will be asked to grant permissions. This step will automatically allow the specific role to view wearable data without having to edit the permissions via Administration - Configuration - Roles and Permissions.

Tick the relevant role(s) that should have permission.

Click Next and then the process is complete.

You should now run a sync on your console and wait for the data to populate on AMS. This process can take some time depending on the amount of data on your wearable account.

Now that you have complete the mappings and set up of your wearable account the data will begin to populate in AMS once you have synced your console.

During the process above, a new left-hand menu item will have been created calledWEARABLESwith an option below calledCATAPULT DATA. Clicking on this option will take you to a view results table containing the wearable data from the OpenField or GPSports Cloud account you have integrated with.

The Catapult Data View Results screen is where any alerts setup will highlight to acknowledge a breach in the set thresholds.

If you add a new AMS athlete, you must go through the mapping process to ensure the Catapult AMS platform knows to apply the OpenField/GPSports data to that AMS athlete.

Please follow this guide for information regarding mapping: Mapping AMS Athletes to OpenField/GPSports Athletes

Navigate to the Full Report page:

From the Full Reports page, select the green 'Edit' icon from the 'Options' column.

You may either change the existing information using the free-note boxes and drop-down menus or select 'Add Chart' from the bottom right of the screen to add another chart.

Select 'Save' to apply the changes made.

Reports are an effective way of collating data for individuals or a group, to analyse results and draw comparisons and conclusions. In the Catapult AMSplatform, reports are groups of charts, which are able to be viewed or edited at any stage for the most up to date collation of data.

To Create a Report Template:

Select 'Reporting' and 'Full Reports' from the left-hand menu.

Select the 'Create Report Template' from the top right-hand of the screen.

Enter the report title and if it is to be displayed on the mobile application or as an individual report.

Selectthe chart to be displayed on the report, the row it is to appear in and whether it is to be half size or full size.

Select 'Add Chart' if more charts are to be included in the report.

Charts can be removed at any time by selecting the red 'Trash' icon to the right of the chart information.

When finished, select 'Create Report' to save.

On the Full Reports page, select from the icons in under the 'Options' column to manipulate the report.

To generate and view a report, select the blue 'View' icon.

Using the drop-down tabs, select the date range or season and competition phase that you wish to run the report from.Date Selector:Season Selector:

Select the individual player or group of players from the next drop-down menu.Individual(s):Groups:All Team:

Select if a comparison is required.

Select whether you wish to display the team average.

Select whether you wish to include archived players in the report.

Select 'Run Report' in the bottom right-hand corner of the screen to generate the report.

It is just as important to know how an individual is tracking as knowing how the team is progressing as a whole. Data can be reported on individually, for when a coach is just wanting to see a player's progress. The individual report can be used to show multiple test results for a player simultaneously.

Using the Individual Report Module

Click Reporting and Individual Report in the left-hand menu.

Select the athlete that you wish to review.

Using the date display on the right side of the criteria search, choose the date range to review.

To switch the data display to a table format, select the 'Switch Data Display'.

The reports can be printed through selecting the Print Report button on the top right of the screen.

Removing a variable from the graph can be achieved by clicking on the legend variables.

USING THE ALERTSLIST

The Alerts List congregates all of the triggered alerts in one location. It can be used to monitor players triggering alerts, or if particular alerts for a test are triggered more than others. This can then be used to adjust a player's training. Once an alert has been actioned it can also be deleted from this screen.

To view all alerts please navigate to Reporting - Alerts List:

MONITORING ALERTS

Use the search filter at the top left-hand of the table to search for a particular player.

To view alerts within a date range select the dates in the top right-hand side of the table and a drop-down menu will appear. Select 'Submit' to update the table.

Copy, print or export the alerts list using the corresponding buttons below the dates.

To delete records, select the individual alert from the table, or the 'Select All' box above the search filter, and select 'Delete Selected Records'.

Alerts can be configured for any test in the system. They are a way of easily monitoring how player's results are changing over time, which can be useful when determining their training loads. This has implications on their risk of injury and overall performance among other things, so can be quite useful for the coaching staff.

Alerts can be highlighted when viewing results, viewed as a list and an e-mail notification can be sent when they are triggered.