Sasaki Associates FAQs

This article will go over how to setup your Mac to print to 'Canon-Incubator'

From your Mac - Connect to the wireless network 'SasakiFoundation' (Wireless info to be obtained from Alexandra)

Once connected, press the 'Command' key + the spacebar key; this will bring up the spotlight search

In the spotlight search, type 'printers' and it should bring up 'Printers & Scanners' as an option to choose from. Select that.

Next, click on the '+' button to add a printer

Next, on the add screen. Click on the 'IP' tab. Make sure everything matches as seen in the picture below

IP Address: 172.16.2.105

Protocol: AirPrint

Name: Change from the IP address to 'Canon-Incubator'

Use: Airprint (This should automatically fill in)

Click 'Add'

That's it! The printer has been added.

This article will walk you through installing the Canon-Incubator on a Windows 10 machine.

In your start menu or on the Cortana search bar, type 'Printer' and you should see 'Printers & Scanners' come up. Select that.

Next, click on 'Add a printer or scanner'

It will start searching but, will not find the printer we are trying to add.

You will need to click on 'The printer that I want isn't listed'

Next, you will come to the following screen where you will select 'Add a printer using TCP/IP address or hostname'

Click, Next

On the next screen, please ensure it looks like the following below

Device Type: Autodetect

Hostname or IP address: 172.16.2.105

Port name: 172.16.2.102 (This will automatically fill in)

Click, Next

It will now start detecting the TCP/IP port

Now you will come to the following screen where is is saying addtional port information is required.

Leave it at its default 'Generic Network Card' and click, Next

It will now detect the driver model and then switch to the screen where you choose the driver

Here, you will select the following

Manufacturer: Canon

Printers: Canon Generic Plus PS3

Then, click Next

After it installs the printer driver, it will ask you to name the printer

Please type: Canon-Incubator

Then, click Next

Now, you will be asked if you want to share this printer or not.

Select, 'Do not share this printer'

Click, Next

You will finally come to the end of the wizard. You should see 'You've successfully added Canon-Incubator'

Click, Finish.

All set!