Time Timer FAQs

You can set a timer to repeat using the "Plays" setting. It will automatically loop as many times as you'd like!You will need to open up one of your Saved Timers in order to see the Settings icon on the bottom viewed play bar.

In the “Settings” screen you will find a line called “Plays 1 time,” under Timer Duration.

Tap the + button to add the desired amount of plays. Timers can play up to 99 consecutive times.

When a Timer has been saved and is active, a new feature called the “Play Bar” appears beneath the Timer disk.The Play Bar is segmented into the number of plays a Timer has.Each segment is synchronized with the Timer (disk) and disappears gradually as time elapses. For example, if you set the Timer for 3 Plays and hit save, the Play Bar will consist of 3 segments.

First, the Timer will be completely blank.

Second, a notification will appear that signals when a timer has expired. It will include the Timer name/ title.

Third, you can set a different Tone for each Timer, and hear which one has finished when the Tones go off.

To set the time on your Time Timer Watch PLUS, please do the following:

Press "Mode" until you are in Clock Mode. Then press and hold the Set button for three seconds.

Use the plus and minus buttons to adjust the current hour.

Then press the Next (Mode) button and use the plus and minus buttons to set the current minute, seconds, clock format (12- or 24-hour) and am/pm meridian.

Press the Set button once to confirm.

To learn how to use all the features of the Watch PLUS, we recommend you watch the video below.

The steps below outlinea fewways to adjust the alert/ alarm volume on your iOSapp.If you're not hearing an audible alarm at all when timing is complete, please check out this guide to enable the alert.

In-App Time Alert settings

In the main Timer view (home view) you will see a green bell or vibrate icon under the Timer in the right corner. Tap on that to open two sliders for sound and vibration. When they are green, sound is ON. Tap the carrot (downward arrow) to hide the buttons.

Using the Volume Buttons or Sound Settings

The physical buttons on the side of your device are your main volume buttons: turn up the volume using the top button, and turn the down the volume using the bottom button. If this does not change the volume, navigate to Settings > Sounds and slide the Ringer and Alerts slider at the top of the page. You may also want to enable the "Change with Buttons" option to allow you to change the volume via the buttons on the side of your device.

Create time blocks on any face by snapping set markers in the grooves between the red disk and numbers. The MAX comes with three colored set markers, that can be stored on the back of the timer.

Here is a short video to demonstrate.

Insert your finger through the hole on the back of MAX and push out all three two-sided timer faces. Place the selected timer face (or dry erase face) on the top and then snap them back in place, one face at a time.

Here is a short video demonstration.

After switching out the time faces, you will have to match the duration by switching the timer settings on the back.

Turn the time duration dial on the backof thetimer to match the total length of time represented on the selected timer face or written on the dry erase face.

Here is a short video demonstration.

The Time Timer Watch PLUS's alarm mode allows you to seta single time-of-day alarm where you can be reminded of a particular event at some point during the day.

You can customize the type of alert you'd like to receive at the time of day for which your alarm is set. The alert can be a slight vibration on the wrist, an audible beep or both!

Currently, you cannot set multiple time-of-day alarms with the Time Timer Watch PLUS. If there's a particular activity you'd like be be reminded of frequently, you might be able to use a custom repeating timer.

To set the alarmon your Time Timer Watch PLUS, please do the following:

Press "Mode" until you are in Alarm Mode.

Then press and hold the Set button for three seconds. Use the plus and minus buttons to adjust the alarm hour.

Next, press the Next (Mode) button and use the plus and minus buttons to set the alarm time.

Press the Next button and plus button to choose the type of alert (vibrate, audible or both).

Press the Set button once to confirm.

To learn how to use all the features of the Watch PLUS, we recommend you watch the video below.

Yes you can create and save multiple timers. Just tap the name of your timer in the upper left-hand corner of the screen, and then tap Add Timer. To add additional timers, just repeat this process. Every timer is automatically saved in the list view.

You are able to delete Timers in multiple ways:

Right-swipe a Timer in the List View screen.

If a Timer is running and not on the List View screen, you can also tap the Close icon.

Deleting a Timer is permanent. Whenever a user tries to Close or Delete a Timer there is always an option to Save.

The Time Timer Watch PLUS has three primary modes: Clock, Alarm and Timer. To watch a video on how to use these modes, please view the video embedded at the bottom of this article.

The Different Modes

To begin, it's important to know what mode you're inand the watch face for each mode looks a little bit different. The image below shows what the watch face for each mode looks like.

Click here for more information

Clock Mode

Clock mode displays the time of day as both an analog and digital clock. The digital clock can be shown using a 12 or 24-hour format.

Alarm Mode

Alarm mode provides a single time-of-day alarm where you can be reminded of a particular event at some point during the day.

You can customize the type of alert you'd like to receive at the time of day for which your alarm is set. The alert can be a slight vibration on the wrist, an audible beep or both!

Currently, you cannot set multiple time-of-day alarms with the Time Timer Watch PLUS. If there's a particular activity you'd like be be reminded of frequently, you might be able to use a custom repeating timer.

Timer Mode

Timer Mode is the most powerful feature of the Time Timer Watch PLUS and operates like traditional Time Timer products. You can set an Original 60-minute Timer where time is displayed as a fraction of an hour, or a Custom Timer where a full disk represents any value of time from 1 to 99 minutes.

You can customize the type of alert you'd like to receive at the end of timing. The alert can be a slight vibration on the wrist, an audible beep or both!

Timers can also be set to repeat. For example, if you'd like to receive a vibrate and/or audible alert every 3 minutes, simply set a Custom Timer for 3 minutes and activate the repeat feature. Note that you may see a slight reduction in battery life by frequently using a repeating timer. on Time Timer Watch PLUS battery life.

The Watch PLUS's Icons

There are a few different icons that you might see on your Watch PLUS's screen. The image below shows what each icon represents.

For a little extra added context, the image below shows what the Watch PLUS face would look like if:

You're currently viewing Clock mode

Have a Custom Timer running with both an audible and vibrate alert active

Have a time-of-day alarm set with both an audible and vibrate alert active

View the walkthrough video

The video below will walk you through all the features of the Time Timer Watch PLUS including how to set the Clock, Alarm and Timer modes.

We promise you'll love your Time Timer.

If you’re not completely satisfied, return your Time Timer to us within 12 months for a full refund or exchange. No questions asked.

Contact us if you have any questions or concerns.

A single timer can be set on the Time Timer Watch PLUS, but it can be set to repeat at the interval you choose. To set an Original Timer on your Time Timer Watch PLUS, please do the following:

Press "Mode" until you are in Timer mode (a portion of the red disk will display).

Press the Set button for three seconds until the time begins to flash. Then use the plus and minus buttons to set the duration of your timer and press Next to confirm. An Original Timer can be set to any duration between 1 and 60 minutes, in 1-minute increments.

Then use the plus and minus icons to choose the type of alert that will occur when time runs out (vibrate, audible or both). Press Next to confirm.

Finally, use the plus and minus buttons to select Original Timer and indicate if you'd like the timer to repeat or only count down once. Press Next to confirm a final time.

To start the Timer, push the red start/stop button.

To learn how to use all the features of the Watch PLUS, we recommend you watch the video below.

If the red disk on your Original Time Timer (including 3", 8"and 12") stops moving, please try the following:

First, make sure you timer has a fresh battery if you have not replaced it recently. Install a new AA battery with the positive end (the nub) inserted first.

Next, rotate the red disk clockwise from 0 to 60 and keep rotating it around. This will clear any dust or debris that might have become trapped under the disk.

Ensure the white face is under the 3 placement holders (located in top left section of the inside face) to prevent buckles from stopping the disk.

Now, rotate the disk counterclockwise. Lift the clear plastic button over the 0/60 point and keep rotating counterclockwise until the disk is all the way back to 0.

The video belowillustratesPoint2 and 3in action.

If you're still having issues with your timer, please click here to Request a Replacement.

To install the AA battery in your Original Time Timer, please watch the video below and do the following:

Open the battery compartment on the back of your Timer.

Find the ribbon inside the battery compartment and pull it over the words “Made in China.”

Insert the AA battery with the positive (nub) endfirst into the compartment OVER the ribbon.

Place the cover back on the battery compartment. The ribbon should stick out.

When you’re ready to replace the battery later, simply open the battery compartment and tug on the ribbon to easily pull the battery loose.

Force Touch (an extra hard press) your watch face to access settings. Then select delete. Also, after a timer has completed running, a trash can icon will appear in the lower right-hand corner of the screen for a quick delete option if the timer is no longer needed.

The Visual Schedule Kit for Time Timer8" or 12" is a great way to create a visual schedule for anyone to follow. It is ideal for younger children or any person who benefits from the ability to view pictures of activities instead of numbers.

Follow the video and written instructions below to install the Visual Schedule Kit's blank face on the Time Timer 8" or 12".

Rotate the disk to the "15" position.

Using both hands, gently pull the right-hand side of the inside frame that covered the Timer face, releasing the tabs, and remove.

Lift the numbered face from the Timer and remove.

Lay the blank face onto the Timer by sliding the top of the cutout semi-circle under the red disk. Make sure that the semi-circle fits under the tabs at the approximate locations for "0", "10" and "15".

Reinsert the tabs on the inside frame cover into the right-hand side of the Timer, and gently snap the inside frame back into place.

After the blank face has been installed, place your chosen activity stickers at the appropriate location on the blank face. Use washable markers (or permanent for a regularly repeating routine) to write or draw on the blank face to create a completely custom schedule, too!

Simply tap the Time Timer icon to open the app.

If your Time Timer doesn't beep when time has expired, please view the video below and trythe following:

First, look at the back of your Time Timer and ensure that the On/Off switch is turned On. (When it is in the Off position, the Time Timer won’t beep.)

If that wasn't the problem, replace the battery in your Time Timer.

If you're still having issues with your timer, please click here to Request a Replacement.

No worries! Just use a small amount of super glue to set them back in place. Or, if you'd like, feel free to contact us to request a replacement.

If you would like a replacement watch band, please contact us to request a replacement.

All Time Timer products use the same alert sound when timing is complete. However, there are differences in how you use the end-of-timing alert based on what product you are using. Click here to listen an example of the Time Timer alert.

Alert Loudness

The Time Timer alert is set to 60 decibels (the unit of measurement to signify the intensity of a sound). 60 decibels is roughly the same intensity level as a normal conversation.

On/Off Switch

All sizes of the Original Time Timer and the Time Timer MOD both have an On/Off switch to control the audible alert. When the switch is in the Off position, no audible alert will sound when timing is complete. When the switch is in the On position, an audible alert will sound for a few seconds when timing is complete.

Volume-Control Dial

All durations of the Time Timer PLUShave a Volume-Control Dial on the back of the timer. This dial controls the volume (i.e. the loudness) of the audible alert when timing is complete. The dial can be turned all the way down and the alert will not sound when timing is complete. When the Volume-Control Dial is set to the loudness of your choice, an audible alert will sound for a few seconds when timing is complete.

The Time Timer iOS, Android and Desktop Apps all have adjustable volume controls for the alert, or the alert can be disabled entirely. Read how to set an audible alert for iOS here and read how to adjust the volume for this alert here.

Always Active

The Time Timer TWIST's end-of-timing audible alert is always active and can be silenced by pressing the Play/Pause button when it sounds. If the alert is not manually silenced, it will automatically stop after 1 minute of continuous beeping.

Time Timer Alert Sound

Click here to listen an example of what the Time Timer alert sounds like. When the alert is enabled on the Original Timer Timer, Time Timer MOD, Time Timer PLUS or Time Timer digital applications, the alert will stop after a few seconds once it begins.

By default, Timer alerts will automatically stop after a few beeps. Optionally, you can set your timer alarms to beep continuously until you manually turn it off by doing the following:

In List View, tap the icon in the top right corner (looks like a gear).

Under Settings you will find a title called “Continuous Awake”. Slide the button to be green (On).

This will extend the alert when the Timer runs out until you dismiss it.

You are able to edit a Timer in multiple ways.

One option is to right-swipe an active or inactive Timer in the List View screen.

You can also tap a Timer that is saved, but inactive.

Lastly, you can tap the Settings icon on the Timer page.

If a Timer is active, and you do not it save, it will return back to the active Timer state and resume its countdown. If you edit an active Timer, and Save it, it will restart.

If you're having issues with your Time Timer and would like to request a replacement item or part, we encourage all customers to first contact the retailer where they have purchased their Time Timer, especially if you are located outside the Unites States. If the retailer is not able to provide a resolution, please contact us directly via the form below and we'd be glad to help.

Click the "View original article" button below to begin filling out the form.

You'll occasionally need to replace the battery in your Time Timer. If the red disk has stopped movingyou should check the lens cover before replacing the battery.

To replace the AA battery, please view the video below anddo the following:

Open the battery compartment on the back of your Time Timer PLUS or MOD using a small, Phillips head screwdriver.

The battery compartment is securely closed by a small screw to adhere to the Consumer Product Safety Improvement Act (CPSIA) standards.Although the timer is not a toy, we do realize the product may be used around small children. Therefore, the battery compartment is securely closed by a small screw to adhere to CPSIA standards.

Insert the AA battery negative side (the flat end) first into the compartment so that it is touching the spring.

Replace the cover to the battery compartment and tighten using the small, Phillips head screwdriver.

You'll occasionally need to replace the battery in your Time Timer MOD.

To replace the battery, please follow the instructions below:

1. Open the battery compartment on the back of your Time Timer MOD using a small, Phillips head screwdriver.

The battery compartment is securely closed by a small screw to adhere to the Consumer Product Safety Improvement Act (CPSIA) standards.Although the timer is not a toy, we do realize the product may be used around small children. Therefore, the battery compartment is securely closed by a small screw to adhere to CPSIA standards.

2. Insert the AA battery negative side (the flat end) first into the compartment so that it is touching the spring.

3. Replace the cover to the battery compartment and tighten using the small, Phillips head screwdriver.

Here is a short video showing you how to change the batteries in the Time Timer MAX.

Below is a short video on the basics of the Time Timer MAX.

Here is an image of the Time Timer MAX compared to a coffee cup so you can get a feel for the actual size of the timer.

1. Go into your Settings App on your Watch andTurn on Prominent Haptics in Settings - this will cause the watch to play a stronger haptic immediately before playing the regular haptic. It’s not continuous, but it should be more noticeable than the default setting.(We don’t have any control over the haptic feedback / vibration duration that accompanies a notification on the Watch. Note that this setting will apply to haptics from all apps, not just from Time Timer.)

To enable Prominent haptics on the Watch, open the Settings app, scroll down to Sounds & Haptics, and select Prominent.

The same setting is mirrored on the Phone in the Watch app:

2. Please note that notification sounds aren’t audible from Time Timer on the Watch when wireless AirPods are worn. Note also that if you are wearing ear buds, volume levels may automatically change depending on how they are being used.

You can set an audible alarm on the iOS app by going into the Timer Settings when you begin to set a timer. If the time is up, but the alertdidn’t sound on the iPad app or iPhone app, you can turn onthe sound by doing the following:

1. Check your Time Timer app Timer Settings

Within the Time Timer app, go to your Timer Settings and make sure Audible Signal is turned ON.

2. Check your iOS Sound Settings

Make sure your device’s volume is turned up. Often times, this can be changed by pressing the Volume Up button on the side of your device. Though, some iOS users intentionally disable the "Change with Button" options, making it necessary to navigate to the Sound settings and move the Ringer and Alerts volume slider at the top of the page.

check out this write-up for adjusting the alarm volume

3. Check the Mute Switch on your device

Ensure that the Mute Switch (on the side of your device by the volume buttons) is turned OFF. If you can see an orange dot on this button, then Mute is ON. Toggle it off and try your Timer again.

4. Check your Do Not Disturb setting

Ensure that the Do Not Disturb feature is turned OFF. This feature is accessible via the iOS Control Center or within Settings > Do Not Disturb.

5. Check your Silent Mode setting

Ensure that the Silent Mode feature is turned OFF. This feature is accessible via the iOS Control Center.

If you hear the audible alert, but it's too loud or too quiet, please .

All Apple Watches fall asleep after 15 seconds. Luckily, your timer will continue to run in the background even if your watch is asleep. When your timer is up, the watch will vibrate, ding and bring a visual alert up on the watch face.

You can set the volume standards both on the watch or the paired phone.

To set it on the Watch:

Open the Settings app

Swipe with your finger, or turn the Digital Crown (the round button on the edge of the watch) to scroll down to “Sounds & Haptics”

Ensure the Alert Volume is, say, 50\%. Tapping on the speaker icons will lower or raise the volume of the alert. Alternatively, you can turn the Digital Crown to change the volume.

Ensure Silent Mode is off.

Scroll down to “Haptic Strength”. It has three settings: off, medium (1 bar), and strong (2 bars). Make sure it’s not off.

On the paired iPhone:

Open the Watch app

Tap “Notifications”. Scroll down the list of apps until you find Time Timer. Ensure its notifications are enabled (switch is green).

Tap on General. Check that “Do Not Disturb” mode is off, or if you’re Mirroring iPhone, the scheduled time is out with the hours you’re testing the app.

Tap the back button twice until the title bar reads “My Watch”

Tap on “Sounds & Haptics”. Changing the Alert Volume here will produce a test click sound on the Watch. Note that setting the volume here doesn’t change the slider on the Watch, so it’s possible to have the Watch Alert Volume at 100\% and the same setting on the iPhone at 0\%, and you won’t hear anything. Setting Alert Volume to 50\% should be sufficient.

Check the “Haptic Strength” setting below “Silent Mode”. This setting mirrors the same on the Watch - changing it on the phone will immediately change it on the Watch and vice versa.

Ensure Silent Mode is off. Like the “Haptic Strength” setting, this is mirrored between Watch and iPhone.

For more information visit Apple’s help page here: https://support.apple.com/en-us/HT204793

Every physical Time Timer uses a quartz crystal to drive a mechanism which moves the colored disk as time elapses. This quartz mechanism is what is used in household clocks and is very accurate and the reason we chose this mechanism for Time TimersEvery Moment Counts!

The true duration of your timer can be seconds shorter or seconds longer from where the timer disk is originally set.The Time Timer accuracy guide is as follows:

Time Timer PLUS 5 MIN and 20 MIN: +/- 15 seconds.

All 60 minute Time Timers: +/- 30 seconds

Time Timer PLUS 120 MIN (including the 120 Make Time edition): +/- 1 min

This level of accuracy is actually quite impressive!Many common mechanical timers can have variance up to 3 full minutes! In addition, many other timers require the user to set a timer for a minimum of a 10 minute duration before the timer can even begin.

Another factor for timing variance can be your Time Timer's battery life. If you're experiencing slow timing or no movement of the disk at all, you should replace your timer's battery.

If you've changed the battery and your Time Timer is still off by more than the accuracy guide suggests, please contact us to request a replacement.

For the curious:

Many time-of-day clocks also use a quartz crystal for time keeping, but because these clocks consistently count forward, they remain rather accurate.

The Time Timer Watch PLUS is water resistant, which means that it can be worn for general use in situations like the shower, a rain storm,or the pool. While the watch can be worn in those types of situations, the buttons to set the watch should not be pressed while the watch is under water. This can cause water to enter the main housing of the watch. General wear and use should not cause water to enter the watch. The watch is not suitable for diving.

The Time Timer MAX includes 8 timer durations and allows for the faces to be changed out as needed. This package includes the longer durations of 4-hour, 8-hour, 24-hour, and an extra dry-erase face.

Time Time MAX extra timer faces

Package includes2 double-sided faces: 4hr/8hr and 24hr/dry-erase face.

Time Timer comes with the three colored Set Markers. Just in case they get misplaced or broken we have an extra set package you can purchase.

Time Timer MAX extra set markers

Each packageincludes 3 Set Markers: 1 Sky Blue, 1 Lime Green, 1 Purple.

Whenever you want a change of pace, it's easy to switch the color of your Time Timer MOD.The Time Timer MOD's removable silicone cover isa durable and attractive way to protect your new MOD, and it's available in our most popular colors!Each cover is sold separately.

Time Timer MOD - Covers

The Time TimerDry Erase Board accessory is an activity and message center for office, home and school. It is perfect for time-sensitive messages and keeps schedules on time.

Time Timer MOD - Dry Erase Board

If you're having issues with your Time Timer and end up needing a replacement sent to you, we'll likely want to know the batch number listed on the back of your specific timer. Refer to the images below to see where the batch number is located on various Time Timer products.

Original Time Timer 3"

Original Time Timer 8"

Original Time Timer 12"

Time Timer MOD

Time Timer PLUS 20 MIN, 60 MIN and 120 MIN

Please note that the batch number for the Time Timer PLUS may be located on the inside or outside of the battery door. Be sure to check both locations to identify your batch number.

Time Timer TWIST

The batch number for the Time Timer TWIST is a small number in black ink located near the bottom magnet, between the two screws.

If the red knob on the back of the Time Timer MAX isn't properly set in its groove, this will sometimes effect the movement of the disk. If the red disk still does not move after adjusting the red knob on the back of the timer, try removing the center knob on the front of the timer (top part only). Then use a screwdriver to gently tighten the center screw under the knob in the middle of the timer. This process ensures the disk is securely attached. Next, replace the knob cap and make sure the clear lens is completely snapped down.

If you installed the software from a CD, then you have the old version. This version will no longer be updated.

If you installed the software by downloading it from a Time Timer webpage, and needed a license key to complete the installation process, then you have the newest version that is available. You will automatically receive free updates for thisTime Timer Desktop App as they become available.

After purchasing the Time Timer Desktop App, you will receive two emails. First, you will receive an email from Time Timer with the receipt for your entire purchase. A few minutes later, you will receive a second email that contains your license key and step by step instructions for installing the software on either a PC or a Mac. These directions are also listed below.

Downloading the Time Timer Desktop App

1. Click the button found in the second email you received to download theTime Timer Desktop App installation file (example below). Alternatively, you can download the Time Timer Desktop App by clicking this link.

2. As noted in the examplebelow, select the version that is right for you - Mac or PC.

3. Click the "Run" button if prompted. This will automatically begin the installation processes after the installation file has downloaded.

4. Note that some web browsers may provide a warning about the file you are about to download. If using Chrome, click the downward arrow and select "Keep". On Internet Explorer, click "More Info" to approve and continue. The Time Timer Desktop App is completely safe.

5. After the files have downloaded, another warning will pop onWindows computers, click "More Info", then click "Run Anyway".The Time Timer Desktop App is completely safe.

6. If you clicked "Run" when initially downloading the App, the installation process will automatically launch when the download finishes. If you clicked "Save" when prompted, you'll need to double click the ".exe" or ".dmg" installation file. When prompted enter your serial key (found in your second post-purchase email) and email address to complete the installation and activation as shown below.

7. You're all set! The Time Time Desktop App should be downloaded, installed and activated on your computer. Please contact us if you have any questions!

The Time Timer Watch PLUS comes in two different sizes, small and large. To get a better idea of how the watch will fit on your wrist and determine which size is best for you, download our Sizing Instructions.

This is a PDF that you can download and print at home. It has actual-size representations of both sizes of the Time Timer Watch PLUS. Simply print this PDF, grab your scissors to cut out the watches and try them on!

The red disk defaults to represent 60 minutes. If you’d like to customize the time scale, tap on the overlapping circle icons in the lower left-hand side of the watch face. This allows you to toggle between a custom scale disk and 60-minute scale disk.

Once you select custom, you can select the hours, minutes and seconds you want the entire disk to represent. Tap on each time area (hours, minutes, seconds) to adjust duration using the digital crown.

Tokeep your device from falling asleep while the App is open and Timers are running, do the following.

Tap the List View button in the upper right corner to return to the Time Timer List View page.

Then, tap the Global Settings icon (looks like a bicycle gear) in the upper right corner.

Switch Awake Mode ON (slide button to green).

This applies only to the Time Timer appit will not keep your device awake while you use other apps.

Time Timer is happy to process purchase orders (POs) for schools and other organizations.

It is quick and easy to submit a PO:

Our preferred method to receive a PO is via an email. If at all possible, please email so that we can process your order as quickly as possible.

Via email: [email protected]

Via fax: 513-561-4699

Information you need to know:

Shipping and handling is a flat rate of $5.00 for orders under $50.00. Shipping and handling is FREE for all orders over $50.00.

Payment terms are NET 30

An easy way to list products, product numbers and total pricing for the PO is to select the products and quantities you would like in our store, and add them to the shopping cart. Then, just click 'view cart' to see your purchase summary, print that page, and include it with your scanned or faxed PO.

Time Timer W-9:

You can download the current Time Timer LLC W-9 by clicking here.

Time Timer's address & phone number:

Time Timer LLC

7707 Camargo Rd.

Cincinnati, OH 45247

513-561-4199

For those who make payment by CHECK, please send remittance to the following address:

Time Timer LLC

PO BOX 645761

Cincinnati OH 45264-5761

A 60 Minute Timer is fixed and numbered where the disk is always a fraction on 60 minutes. It looks and works exactly like our standalone Timers.

A Custom Timer is a Timer that is scaled to any time duration. The full disk can represent anything from 1 second up to 99 hrs. Custom Mode is ideal for activities where you need much more or much less than 60 minutes.

The Time Timer Watch PLUS uses a few different icons to tell you what mode your watch is in and the status of any potential timers are alarms that may be active.

The Different Modes

To begin, it's important to know what mode you're inand the watch face for each mode looks a little bit different. The image below shows what the watch face for each mode looks like.

The Watch PLUS's Icons

There are a few different icons that you might see on your Watch PLUS's screen. The image below shows what each icon represents.

For a little extra added context, the image below shows what the Watch PLUS face would look like if:

You're currently viewing Clock mode

Have a Custom Timer running with both an audible and vibrate alert active

Have a time-of-day alarm set with both an audible and vibrate alert active